SonicWall has stopped patching its Gen 6 and Gen 6.5 firewalls, and the company is telling customers to replace them now. In an advisory published Wednesday, November 18, 2026, SonicWall said every Gen 6 and Gen 6.5 appliance running SonicOS 6.x has reached end of support. That means no more firmware updates and no more security patches.
The company's wording leaves little room for interpretation. "SonicWall will not release firmware updates or security patches for Gen 6, regardless of severity," the SonicWall product advisory states. Coverage from Help Net Security and others followed on November 19 and 20.
The affected base is large and spread out. SonicWall's firewalls are widely used by small and mid-sized businesses, branch offices and remote-access setups, so this decision reaches well beyond large enterprise networks. A US company that still runs one of these units at its internet edge now has a hardware problem, not just a maintenance item on a to-do list.
Which SonicWall firewall models lose support
The notice covers Gen 6 and Gen 6.5 hardware running SonicOS 6.x. It also includes Gen 6 NSv virtual firewalls, which the advisory covers from NSv 10 through NSv 1600. Virtual instances are easy to miss because they do not sit on a shelf like a box, so inventory them separately.
Coverage names several example models: TZ300, TZ350, TZ400, TZ500 and TZ600 series units, along with SOHO and SOHO 250 units, as heise online reported. If your device is a Gen 6 or Gen 6.5 model and it runs SonicOS 6.x, it is covered. Check both the hardware generation and the SonicOS version in the admin interface before assuming otherwise.
A third-party threat-watch aggregator, Helix, lists model-by-model end-of-support dates running from 2024 to 2026. USA 24 has not verified those dates against SonicWall's official list, so treat them as unconfirmed and check the vendor notice directly.
Why a permanent end of support is a bigger deal than a missed update
On its own, an end-of-support notice is a reminder to plan an upgrade. This one carries a harder consequence. SonicWall says any new flaw in Gen 6, including a critical one, will stay open permanently on those devices.
SonicWall's own history shows what that looks like. The precedent is CVE-2024-40766, a critical SonicOS flaw with a CVSS score of 9.3. It affected Gen 5, Gen 6 and early Gen 7 firewalls and was reported exploited alongside ransomware activity against SSL VPN accounts. Supported firewalls received a fix. Gen 6 did not.
That split is the core of this story. When a bug affects several product generations, SonicWall ships the fix only to supported models, so Gen 6 owners get no fix while everyone else does. The people who lose are owners of older units who cannot buy or extend support, including small and mid-sized firms that depend on those boxes to keep remote access running. The clearest winners are the vendor, which moves customers to newer hardware, and the partners who sell the migration.
What SonicWall expects attackers to do
SonicWall says it expects internet-facing Gen 6 units to be actively targeted. The company has also argued that public advisories give attackers a map of where to look, and it cites that as a reason Gen 6 cannot be patched safely in the future. In a statement quoted by The Hacker News, the company put it more directly: "The risk to an unsupported firewall grows every day it stays online."
The track record gives that warning some weight. CISA has flagged three vulnerabilities used against SonicWall firewalls in roughly the past two years, according to Help Net Security. SC World reported Mandiant's mean time to exploit as negative seven days, which means exploitation can begin before a patch is public. For a device that will never receive a patch, defenders have no fix to apply at all.
The sources do not show what is already happening. No new Gen 6 vulnerability is named, and none confirms active exploitation of Gen 6 devices in November 2026. The concern is forward-looking, based on the end-of-support policy itself. That is still a meaningful signal, but it is a warning about the next flaw, not a report about an attack in progress.
Edge infrastructure keeps drawing attention from attackers. USA 24 has covered a VMware vCenter zero-day that attackers exploited since September, and the Mandiant figure above shows why a missed patch window can be costly.
How to replace a Gen 6 SonicWall firewall
SonicWall's recommended path is replacement with a Gen 8 firewall running SonicOS 8. Customers cannot buy or extend support for affected units, so replacement is the only route the company offers. Settings can be carried over, and SonicWall has published a migration guide, according to heise.
SonicWall also says SonicOS 8 has been hardened with AI-assisted security testing, and that SonicOS 6.x has not. Those are the company's claims. USA 24 has not independently tested either version, so treat the comparison as vendor messaging rather than a verified result.
If replacement cannot happen this week, the interim controls are the only levers you have. They reduce exposure but do not add a fix. Treat them as a bridge to a new device, not a permanent setup.
Replacement costs and migration timelines for smaller customers are not covered in the sources reviewed. Budget and scheduling questions will need answers from an authorized SonicWall partner, so start that conversation early, before the first post-retirement flaw forces a rushed decision.
Steps to take before the old firewall comes out
The first two steps come from SonicWall's guidance. The third is the interim hardening that SC World reported SonicWall recommends. The final step is our own suggestion.
- Inventory every SonicWall device. Confirm whether each unit is a Gen 6 or Gen 6.5 model running SonicOS 6.x, including virtual NSv instances.
- Plan replacement with a Gen 8 firewall running SonicOS 8, and contact an authorized SonicWall partner to handle the migration.
- Until the swap happens, disable unnecessary services, turn on multi-factor authentication and limit remote access to known source addresses.
- Review logs for unusual VPN logins and configuration changes. If anything looks off, reset VPN and admin credentials.
The last step matters more than it looks. If a Gen 6 unit has already been probed or misconfigured, a replacement alone will not remove an attacker who already has a foothold.
What remains unknown
Several questions are still open. The sources do not give a count of US devices still running Gen 6, so the size of the exposure cannot be measured from them. They also do not say whether any organization has been compromised through a Gen 6 unit.
The model-by-model dates from the third-party aggregator remain unverified, and replacement costs for smaller customers are not covered. Those gaps matter most for small businesses and branch offices, which are the groups with the least room to absorb a surprise hardware bill.
What to watch next
Watch for three things. First, whether SonicWall or CISA publishes a Gen 6-specific advisory once a flaw is found, since that would turn the current forward-looking concern into a confirmed one. Second, whether SonicWall's migration materials add detail on cost and timing for small customers. Third, whether researchers report Gen 6 units appearing in attacks, which would turn a policy warning into an active incident for the businesses still running them.




